This course provides an introduction into electrical troubleshooting theory in troubleshooting common electrical problems including: low voltage, high voltage, unwanted resistance, open circuits, high resistance shorts-to-ground, and current and voltage unbalance. Efficiency technology and sustainable practices are covered. An effective troubleshooting methodology is embedded in this course.

This course provides an introduction into electrical troubleshooting theory in troubleshooting common electrical problems including: low voltage, high voltage, unwanted resistance, open circuits, high resistance shorts-to-ground, and current and voltage unbalance. Efficiency technology and sustainable practices are covered. An effective troubleshooting methodology is embedded in this course.

This course provides an introduction into electrical troubleshooting theory in troubleshooting common electrical problems including: low voltage, high voltage, unwanted resistance, open circuits, high resistance shorts-to-ground, and current and voltage unbalance. Efficiency technology and sustainable practices are covered. An effective troubleshooting methodology is embedded in this course.

This course provides an introduction into electrical troubleshooting theory in troubleshooting common electrical problems including: low voltage, high voltage, unwanted resistance, open circuits, high resistance shorts-to-ground, and current and voltage unbalance. Efficiency technology and sustainable practices are covered. An effective troubleshooting methodology is embedded in this course.

The course gives an overview of different types of electrical machines and drives. Different types of mechanica loads are discussed. Maxwell's equations are applied to magnetic circuits including permanent magnets. DC machines, induction machines, synchronous machines, switched reluctance machines, brushless DC machines and single-phase machines are discussed with the power electronic converters used to drive them.Study Goals After following this course the students should have an overview over the different types of electrical machines and the way they are used in drive systems and they should be able to derive equations describing the steady-state performance of these machines

This course introduces principles and mathematical models of electrochemical energy conversion and storage. Students study equivalent circuits, thermodynamics, reaction kinetics, transport phenomena, electrostatics, porous media, and phase transformations. In addition, this course includes applications to batteries, fuel cells, supercapacitors, and electrokinetics.

"This course explores electromagnetic phenomena in modern applications, including wireless and optical communications, circuits, computer interconnects and peripherals, microwave communications and radar, antennas, sensors, micro-electromechanical systems, and power generation and transmission. Fundamentals include quasistatic and dynamic solutions to Maxwell's equations; waves, radiation, and diffraction; coupling to media and structures; guided waves; resonance; acoustic analogs; and forces, power, and energy."

First published in 1968 by John Wiley and Sons, Inc., Electromechanical Dynamics discusses the interaction of electromagnetic fields with media in motion. The subject combines classical mechanics and electromagnetic theory and provides opportunities to develop physical intuition. The book uses examples that emphasize the connections between physical reality and analytical models. Types of electromechanical interactions covered include rotating machinery, plasma dynamics, the electromechanics of biological systems, and magnetoelasticity. An accompanying solutions manual for the problems in the text is provided.

This course is a basic course on Instrumentation and Measurement. Firstly, the detection limit in a typical instrument for measurement of an electrical quantity is determined for: offset, finite common-mode rejection, noise and interference. The dominant source of uncertainty is identified and the equivalent input voltage/current sources are calculated. Secondly, the measurement of a non-electrical quantity is discussed. In this case the detection limit should be expressed in terms of the non-electrical input parameter of interest. Issues discussed are: (cross-)sensitivities in frequently used transduction effects, non-electrical source loading and noise in the non-electrical signal domain. Coupled domain formal modeling is subsequently introduced to facilitate analytical multi-domain system analysis. Finally, the detection limit in typical applications in the mechanical, thermal, optical and magnetic signal domain are analysed, along with circuit and system techniques to maximize overall system detectivity.

This course is an introduction to power electronics. First the principles of power conversion with switching circuits are treated as well as main applications of power electronics. Next the basic circuits of power electronics are explained, including ac-dc converters (diode rectifiers), dc-dc converters (non-isolated and isolated) and dc-ac converters (inverters). Related issues such as pulse width modulation, methods of analysis, voltage distortion and power quality are treated in conjunction with the basic circuits. The main principles of operation of most commonly used power semiconductor switches are explained. Finally, the role of power electronics in sustainable energy future, including renewable energy systems and energy efficiency is discussed.

Study Goals
To get acquainted with applications of power electronics, to obtain insight in the principles of power electronics, to get an overview of power electronic circuits and be able to select appropriate circuits for specific applications and finally to be able to analyse the circuits. The focus in the course is on analysis and to a lesser extent on design.

Na het behalen van dit vak kan de student:

filter-overdrachtsfuncties middels state-space synthese afbeelden op filter-topologieen, deze optimaliseren m.b.t. dynamisch bereik en gevoeligheid voor componenten-variaties en realiseren met behulp van integratoren;
circuits voor integratoren, analoge filters, continue-tijd filters, en nullors (operationele versterkers) ontwerpen en effecten ten gevolge van niet-ideale componenten en aliasing analyseren

This book is the result of a co-design project in a class in the Masters of Education program at the University of Calgary. The course, and the resulting book, focus primarily on the safe and ethical use of technology in digital learning environments. The course was organized according to four topics based on Farrow’s (2016) Framework for the Ethics of Open Education and discusses Artificial Intelligence (AI) , social networking services (SNS), 3D printing, resource sharing, adaptive learning systems, STEM, assistive technologies, admissions, and communications. In each of the nine chapters, the authors discuss the connection to the value of technology in education, and practical possibilities of learning technologies for inclusive, participatory, democratic, and pluralistic educational paradigms.

Introduction to design of feedback systems. Properties and advantages of feedback systems. Time-domain and frequency-domain performance measures. Stability and degree of stability. Nyquist criterion. Frequency-domain design. Root locus method. Compensation techniques. Application to a wide variety of physical systems. Some previous laboratory experience with electronic systems is assumed (6.002 or 6.071 or 16.040).

This course explores the fundamentals of optical and optoelectronic phenomena and devices based on classical and quantum properties of radiation and matter culminating in lasers and applications. Fundamentals include: Maxwell's electromagnetic waves, resonators and beams, classical ray optics and optical systems, quantum theory of light, matter and its interaction, classical and quantum noise, lasers and laser dynamics, continuous wave and short pulse generation, light modulation; examples from integrated optics and semiconductor optoelectronics and nonlinear optics.

This course introduces students to both passive and active electronic components (op-amps, 555 timers, TTL digital circuits). Basic analog and digital circuits and theory of operation are covered. The labs allow the students to master the use of electronic instruments and construct and/or solder several circuits. The labs also reinforce the concepts discussed in class with a hands-on approach and allow the students to gain significant experience with electrical instruments such as function generators, digital multimeters, oscilloscopes, logic analyzers and power supplies. In the last lab, the students build an electronic circuit that they can keep. The course is geared to freshmen and others who want an introduction to electronics circuits. This course is offered during the Independent Activities Period (IAP), which is a special 4-week term at MIT that runs from the first week of January until the end of the month.

This guide is designed to help educators navigate the Digital Instruction Hub on OERTX and discover how to incorporate Open Educational Resources (OER) into their courses to foster interactive and inclusive learning experiences.

The physics of microelectronic semiconductor devices for silicon integrated circuit applications. Topics: semiconductor fundamentals, p-n junction, metal-oxide semiconductor structure, metal-semiconductor junction, MOS field-effect transistor, and bipolar junction transistor. Emphasis on physical understanding of device operation through energy band diagrams and short-channel MOSFET device design. Issues in modern device scaling outlined. Includes device characterization projects and device design project.

The advent of electronics has had a profound impact on our lives and impacted nearly every product that we use either directly or indirectly. Without electronics, present day computers, cell phones, stereos, televisions, and the internet would not be possible. And of course, without computers and modern communications tools, society could not have made the huge strides in fields such as medicine, aerospace technologies, meteorology, transportation, agriculture, education, and many others. It is for these reasons that the invention of the transistor is considered as one of the most important technological advancements in history.

The course is designed to provide a practical - hands on - introduction to electronics with a focus on measurement and signals. The prerequisites are courses in differential equations, as well as electricity and magnetism. No prior experience with electronics is necessary. The course will integrate demonstrations and laboratory examples with lectures on the foundations. Throughout the course we will use modern "virtual instruments" as test-beds for understanding electronics. The aim of the course is to provide students with the practical knowledge necessary to work in a modern science or engineering setting.